Laboratory DC Power Supplies

Programmable Power Supplies for use in laboratories and test benches, the range varies in power from 100W to 15KW and voltage from 30V to 1500V



FT10: 300W - 400W

  • Single unit power output range: 300W/400W
  • Voltage levels included: 20V, 40V, 80V, 160V
  • High power factor and low harmonic content in input
  • Output terminals are available on both front and rear panels
  • Supports remote voltage compensation
  • Sequence and waveform editing functions
  • Battery charging function

    • FT10: 300W - 400W

    FTP1000: 600W - 1800W

  • Output Power 600W/900W/1200W/1500W/1800W
  • Output Voltage up to 3000V
  • Output current up to 120A
  • Small size,1U/half 19 inch or full 19 inch
  • Input high Power factor,low harmonic
  • Sequence and waveform editing function
  • Equipped with battery charging function
  • Comprehensive protection function for over voltage,over current,over power,over temperature
  • Support to set output time,can control and record output time
  • Support Voltage compensation remotely
  • OLED display wide viewing angle,high brightness
  • Standard RS232 and LAN?optional RS485
  • Support standard SCPI and Modbus-RTU communication protocol

    • FTP1000: 600W - 1800W

    FTP1200: 600W - 1800W

  • Single machine power output range: 600 w / 900 w / 1500 w / 1200 w / 1800
  • Maximum voltage output range: 0 - 3000V
  • Single maximum current output range: 0 - 120A
  • Small size, 1U/ half 19 inch or full 19 inch
  • Input high power factor, low harmonics
  • High precision voltage and current control and measurement
  • Sequence and waveform editing function
  • Slope control: can quickly and accurately control voltage (or current) rise and fall
  • Cascade function: Support master-slave parallel mode, operate the entire cascade as if operating a single power supply (optional)
  • Provide a powerful signal monitoring capability of the composite signal port (optional) :
    • Analog programming: control output voltage and output current through analog quantity
    • External control: open or close the output through an external digital signal, and output a digital control number
    • Monitoring output: the output waveform of voltage and current is output in the form of analog quantity, easy to monitor
  • Over-voltage protection, over-current protection, over- power protection, over-temperature protection and other all- round protection functions
  • Support voltage remote compensation
  • OLED display, wide viewing Angle, high brightness
  • Standard LAN, RS485
  • Support standard SCPI and Modbus-RTU communication

    • FTP1200: 600W - 1800W

    FTP9000: 5KW - 180kW

  • Active Power Factor Correction (PFC) for efficiency
  • Wide AC input range: 340VAC to 460VAC
  • Power factor: 0.99, Efficiency: >93%
  • High power density: 15kW/3U
  • Accurate output, fast response, low ripple noise
  • Wide operating region for varied voltage/current
  • Programmable sequence function for simulations
  • Internal resistance simulation for battery-like behavior
  • Voltage ramp-up/down capability
  • CV/CC priority function for load protection

    • FTP9000: 5KW - 180kW

    FTB9000: 5KW - 180kW Bidirectional

  • Regenerative Load Function:Reduces electricity costs and heat generation by feeding back energy to the factory intranet with 95% conversion efficiency
  • Wide Operating Region: Combines power supply and electronic load with energy recovery capability for seamless switching between sourcing and sinking
  • High Power Density: 18 kW/3U with accurate output, fast response, and low ripple noise
  • User-Programmable Sequence Function:Simulates power interruptions, voltage drops, and other changes with 10 sequence files and 100 steps each
  • Four Basic Load Modes:Constant current, constant voltage, constant power, and constant resistance for various testing needs
  • Ideal for: Testing motors, battery packs, BMS, energy storage systems, and other applications

    • FTB9000: 5KW - 180kW Bidirectional

    PS360: 360W

  • Switch mode design: compact & light weight
  • Five models to choose from up to 60V and 30A
  • Constant Voltage and Constant Current operation
  • 0-100% adjustment for Voltage & Current
  • 3 Digit LED Display for Voltage & Current
  • Short Circuit & Overload protection
  • Coarse and Fine Voltage Controls
  • LED indicator for CV , CC modes

    • PS360: 360W

    ZUP: 200W 400W 800W

  • Three power levels: 200W, 400W , 800W
  • Five output voltage ranges: 0-6V , 0-10V , 0-20V , 0-36V , 0-60V , 0-120V
  • Universal input 85~264VAC with PFC
  • Constant voltage/constant current operation
  • Built-in RS232 and RS485 interface
  • GPIB programming option
  • External voltage or resistance programming
  • Parallel operation (master/slave)
  • Bench mount or rack mount

    • ZUP: 200W 400W 800W

    GEN: 750W 1500W

  • Universal input 85~264 VAC
  • High power density 1500W in 1U rack
  • Output up to 600V
  • Built in RS232/RS485 interface - standard Optional GPIB (SCP) interface
  • Software calibration and Last Setting Memory
  • Parallel operation with Active Current Sharing
  • Series Operation ... maximum 2 units with external diodes
  • External analog programming and monitoring
  • Optional isolated analog programming and monitoring
  • Lab View and Lab Windows drivers

    • GEN: 750W 1500W

    SM15K-15kw-bidirectional-power-supplies

  • Bi-Directional power supply, standard 15kW Source & Sink
  • Flexible output with constant power characteristic
  • Power Regeneration Technology: sink power is not dissipated
    • but fed back into the grid
  • Designed for long life at continuous full power
  • Excellent dynamic response to load changes, digital controlled
    • with the possibility to adapt to the type of load
  • Very low heat dissipation, efficiency 95% or more
  • Protected against all overload and short circuit conditions
  • Operation on a wide range of three phase AC input voltages
  • Standard Ethernet & Web interface
  • EMC surpasses CE requirements: low emission & high immunity
  • Low audible noise: temperature controlled cooling fans
  • Durable digital encoders for voltage & current adjustment and menu operation
  • Large user display, menu driven operations

    • SM15K-15kw-bidirectional-power-supplies

    AR3700 Series - DC Electronic Load 150W 300W

  • LCD display with backlight
  • High resolution measurement
  • Constant Current/ Contant Power / Constant Resistance modes
  • Number keypad and rotary knob
  • Overvoltage / over current / overpower / overtemperature / polarity reversal protection
  • 10 steps program
  • PC controlled
  • Can be connected in parallel

    • AR3700 Series - DC Electronic Load 150W 300W

    PSI10000 2U Series -1.5KW-3KW-power-supplies

  • Wide range input, 110 V - 240 V +10 % 1ph AC (autoranging)
  • Active Power-Factor-Correction, typical 0.99
  • Very high efficiency up to over 95 %
  • Voltage from 0 - 60 V up to 0 - 1500 V
  • Currents from 0 - 6 A up to 0 - 120 A
  • Flexible power regulated DC output stages
  • Color 5 inch TFT display with touch control and intuitive user interface
  • Galvanically isolated Share-Bus for parallel operation of all power classes in the 10000 series
  • Master-Slave bus for parallel operation of up to 64 units of all power classes in the 10000 series
  • Regulation mode CV, CC, CP, CR with fast crossover
  • Digital regulation, high resolution with 16bit ADCs and DACs, selection of control speed: Normal, Fast, Slow
  • Integrated function generator with predefined curves
  • Predefined automotive test procedures for LV123, LV124 and LV148
  • Command languages and drivers: SCPI and ModBus, LabVIEW, IVI

    • PSI10000 2U Series -1.5KW-3KW-power-supplies

    PSI10000 3U Series -5KW-10KW-15KW-power-supplies

  • Wide range input: 208 V - 480 V, +10%, 3ph AC (autoranging)
  • Active Power Factor Correction, typical 0.99
  • Very high efficiency of up to 96 %
  • High performance of up to 15 kW per unit
  • Voltages from 0 - 60 V up to 0 - 2000 V
  • Currents from 0 - 20 A up to 0 - 510 A
  • Flexible power regulated DC output stages
  • Color 5 inch TFT display with touch control and intuitive user interface
  • Galvanically isolated Share-Bus for parallel operation of all power classes in the 10000 series
  • Master-Slave bus for parallel operation of up to 64 units of all power classes in the 10000 series
  • Regulation modes CV, CC, CP, CR with fast crossover
  • Digital regulation, high resolution with 16bit ADCs and DACs, selection of control speed: Normal, Fast, Slow
  • Integrated function generator with predefined curves
  • Automotive test procedures for LV123, LV124 and LV148
  • Photovoltaics test mode (EN 50530)
  • Command languages and drivers: SCPI and ModBus, LabVIEW, IVI

    • PSI10000 3U Series -5KW-10KW-15KW-power-supplies

    PSB10000 Series -5KW-10W-15KW-bidirectional-power-supplies

  • Wide range input: 208 V - 480 V, +10%, 3ph AC
  • Active Power Factor Correction, typical 0.99
  • Bidirectional power supply, 2-quadrants in source and sink
  • In load operation, regenerative with energy recovery into the grid
  • Very high efficiency of up to 96%
  • High performance of up to 15 kW per unit
  • Voltages from 0 - 10 V up to 0 - 2000 V
  • Currents from 0 - 20 A up to 0 - 510 A
  • Flexible power regulated DC input/output stages (autoranging)
  • Regulation modes CV, CC, CP, CR with fast crossover
  • Digital regulation, high resolution with 16bit ADCs and DACs, selection of control speed: Normal, Fast, Slow
  • Color 5 inch TFT display with touch control and intuitive user interface
  • Galvanically isolated Share bus for parallel operation of all power classes in the 10000 series
  • Master-slave bus for parallel operation of up to 64 units of all power classes in the 10000 series
  • Integrated function generator with predefined curves
  • Automotive test procedures for LV123, LV124 and LV148
  • Battery test mode, battery and fuel cell simulation
  • Photovoltaics test mode (EN 50530), MPPT
  • Command languages and drivers: SCPI and ModBus, LabVIEW, IVI

    • PSB10000 Series -5KW-10W-15KW-bidirectional-power-supplies