Rectifiers Rack Power Solutions

DC power conversion products for the land mobile radio, fixed wireless broadband, small cell and industrial DC power markets. Our DC power supplies, fault-tolerant power systems, voltage converters, battery chargers, power inverters, DC backup systems, and Ethernet-enabled intelligent power supplies and DC power distribution panels are used in emergency response dispatch centers, on board vehicles, and in tower, communications and industrial power sites around the world.



Smart DC Distribution Single Bus 12V 24V 48V 180A

  • 180A peak, 150A continuous system rating
  • 12 GMT fused outputs (15A max. each)
  • Operating voltage range 10-60 volts DC
  • Ethernet-based monitoring and alarm reporting of each output
  • Remote Power Control for remote shutdown or power- cycling of individual outputs
  • HTTPS, TLS1.0, SNMPv1/v2c/v3
  • Remote updating of firmware
  • Form C contacts
  • Up to 30 days of data logging
  • Restore to previously saved settings after a power loss
  • Independently adjustable load shed settings
  • 5 digital alarm contact inputs for site monitoring and reporting of alarms such as door, water, and smoke detectors
  • Fuse-ignore feature prevents nuisance alarms if an unused output does not have a fuse installed
  • Smart DC Distribution Dual Bus 12V 24V 48V 200A

  • Support 24, and +/- 48-volt DC applications
  • 200-amp system current / 100 amps per bus
  • Dual-bus architecture (Bus A & Bus B)
  • 20 GMT fuse output positions rated up to 16 amps continuous
  • 10 outputs per bus / 20 outputs total
  • Front-mounted fuses
  • Standard TCP/IP Ethernet communications provides full remote monitoring and control capabilities
  • Network security protocols include HTTPS, TLS 1.2, SNMP v1/v2c/v3
  • Reporting of total system current (Bus A & Bus B), individual load current, Bus A and Bus B system voltage, and fuse status
  • Alarm reporting via text or email notification
  • Remote individual output power toggling
  • Automatic load shedding disconnects non-critical loads when on battery power (user defined)
  • Network watchdog automatically reboots routers or switches when no response is received
  • Five digital site monitoring input contacts
  • Up to 30 days of data logging
  • Heavy duty input stud connectors on front panel
  • Form C alarm contacts
  • 1RU 19-inch rackmount form factor
  • Intellicharge 12V 24v 48V 360W

  • 360 watts of output power
  • 12-, 24- or +/- 48-volt DC output
  • Intelligent three-stage battery charging
  • Independently regulated battery charging terminals
  • Adjustable charge current limit
  • Integrated low voltage disconnect
  • User selectable flood, AGM and gel battery types supported
  • Temperature-compensated charging
  • Form-C alarm contacts
  • Pro Series 12V 24V 48V 690W - 1190W

  • 690 or 1190 watts of output power
  • 12-, 24- or +/- 48-volt DC output
  • Optional battery backup with low voltage disconnect and adjustable charge current limit
  • Universal power factor corrected input
  • 100-265 VAC input voltage range
  • Space-saving 1RU form factor
  • Form-C alarm contacts
  • Platinum 12V 24V 48V 800W - 1600W

  • 800 or 1600 watts of output power
  • 12-, 24- or +/- 48-volt DC output
  • Standard TCP/IP Ethernet communications provides full monitoring and control capabilities
  • Network security protocols include HTTPS, TLS 1.2, SNMPv1/2/3
  • Optional battery backup with adjustable low voltage disconnect
  • Battery management features include state of charge, runtime remaining, equalization charging and battery discharge testing
  • Alarm reporting via text or email notification
  • Hybrid Power 700W 1400W

  • Up to two 700-watt, 48- or 24-volt DC power modules
  • Total maximum total output power 1.4 kW
  • Integrated 700-watt 12-or 24-volt DC power converter
  • Dual 100-amp battery disconnect breakers
  • Integrated 150-amp low voltage disconnect with adjustable setpoints
  • 90 to 93% efficiency
  • -30°C to +60°C operating temperature range
  • Standard TCP/IP Ethernet communications provides full remote monitoring and control capabilities
  • Network security protocols include HTTPS, TLS 1.2, SNMP v1/v2c/v3
  • User adjustable output voltages and battery charge current limit
  • Advanced battery management features including state of charge, estimated run-time remaining, battery discharge testing, temperature compensated charging
  • Alarm reporting via text or email notification
  • Battery temperature and site monitoring input contacts
  • 1RU 19-inch rackmount form factor
  • Hybrid Ultra 700W - 3500W

  • Up to five 700-watt, 48- or 24-volt DC system power modules
  • Total maximum total output power 3.5 kW
  • Integrated 700-watt 12-or 24-volt DC power converter
  • Dual 100-amp battery disconnect breakers
  • Integrated 150-amp low voltage disconnect with adjustable setpoints
  • Four or eight fully managed load distribution outputs (25 A max. each)
  • 90 to 93% efficiency
  • -30°C to +60°C operating temperature range
  • Standard TCP/IP Ethernet communications provides full remote monitoring and control capabilities
  • Network security protocols include HTTPS, TLS 1.2, SNMP v1/v2c/v3
  • User adjustable output voltages and battery charge current limit
  • Advanced battery management features including state of charge, estimated run-time remaining, battery discharge testing, temperature compensated charging
  • Alarm reporting via text or email notification
  • Battery temperature and site monitoring input contacts
  • 2RU 19-inch rackmount form factor
  • MPS Ultra 700W - 5500W

  • Hot-swappable 700-watt power modules available in 48-, 24- or 12-volt outputs provides up to 5,600 watts of output power in a 2U package
  • Available in four configurations to accommodate either four, five, six or eight 700-watt power modules, integrated with battery management and load distribution modules
  • Integrated TCP/IP Ethernet communications for remote power monitoring and control
  • Network security protocols include HTTPS, TLS 1.2, SNMP v1/v2c/v3
  • Battery Management Module includes dual 100-amp battery breakers and low voltage disconnect relay, with features including battery state of charge reporting, runtime remaining, equalization charging and battery discharge testing
  • Load Distribution Module available with four fully managed outputs (up to 12 managed outputs available)
  • Support for lead-acid and lithium-ion battery types
  • Alarm reporting via text or email notification
  • Modular Power 12V 700W - 2800W

  • Hot-swappable 700-watt power modules available in 12 volt outputs provides up to 2,800 watts of output power
  • TCP/IP Ethernet communications for full monitoring and control capabilities
  • Network security protocols include HTTPS, TLS 1.2, SNMPv1/2/3
  • Optional Battery Management Module and Load Distribution Module
  • Battery management features include state of charge, runtime remaining, equalization charging and battery discharge testing with built-in adjustable low voltage disconnect
  • Load distribution module with four fully managed outputs (additional modules can be added)
  • Support for lead-acid and lithium-ion battery types
  • Alarm reporting via text or email notification
  • Modular Power 24V 48V 700W - 2800W

  • Hot-swappable 700-watt power modules available in 24V 48V outputs provides up to 2,800 watts of output power
  • TCP/IP Ethernet communications for full monitoring and control capabilities
  • Network security protocols include HTTPS, TLS 1.2, SNMPv1/2/3
  • Optional Battery Management Module and Load Distribution Module
  • Battery management features include state of charge, runtime remaining, equalization charging and battery discharge testing with built-in adjustable low voltage disconnect
  • Load distribution module with four fully managed outputs (additional modules can be added)
  • Support for lead-acid and lithium-ion battery types
  • Alarm reporting via text or email notification

  • Parts List

    Parts List

    Part #:

    Qty: